In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup which will look a little scary at first, but it’s really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so that you get something which looks like a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Make sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it best heavy duty dog crate will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you’re done, so you don’t wind up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Make certain it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure that the ears are flat and be certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will have to do some sanding to make certain it is secure on your dog. You can do it by sanding off any excess paper which might have been eliminated from your mask.